(800)464-3100
(800)464-3100

20" I-Bar Sealer w/ Cutter

SKU: W-500I
The sealer is equipped with a film roller, film separator, heat gun holder, and a power outlet. The entire unit is steel constructed (including the work base) for quality and durability.
Price: $468.15
20" I-Bar Sealer w/ Cutter
Product Details
Easy to Operate: Turn on the power source. Set the timer to the lowest setting that will cut through the shrink film. Make sure that one layer of film is under the film separator & one layer of film is over the film separator. Pull enough of the CF shrink film to the sealing surface; seal & cut the start of your new roll of shrink film. Now pull enough of your film past the sealing bar to accommodate the item to be packaged. Insert the item between the 2 layers of centerfold shrink film & press down the sealing bar. As soon as you are able to pull your item away from the seal bar, the seal & cut is complete. Now turn your product a quarter of a turn so that your other unsealed edge can be sealed. Bring down the sealing bar as soon as you are able to pull away your item from the sealing bar, the seal is complete. Apply hot air to the shrink-packaged item using a heat gun to shrink the film uniformly.